Machine
Features:
＊
Unlike conventional sindle-citter
Slotting models that usually leave metal chips on the screw at the operation
direction after Slotting, this double-cutter model performs milling with the
first cutter, while the second cutter removes metal chips left after the
previous processing, maintaining screw cleanliness and increasing the added
value of the processed screws.
Double-cutter Turret:
＊
The first cutter(top cutter)i sdriven by a com. The second cutter(bottom cutter)swings
from from left to right as a rotating center to allow
the first cutter to perfron curve slotting. The
second cutter then trims the slot flat and removes metal chips(the slotting
depth of the first cutter can be adjusted by the left top handle.)
|
Model |
A |
B |
D |
|
1 |
4.11mm |
2.055mm |
ψ2.2~ψ3.5mm |
|
2 |
5.56mm |
2.78mm |
ψ2.8~ψ5.1mm |
|
3 |
7.8mm |
3.9mm |
ψ3.5~ψ6.2mm |
|
4 |
10mm |
5mm |
ψ5~ψ8mm |
